Αυτοκαθαριζόμενο Προφίλτρο View larger

Self- Cleaning (manual) Water Filter

share

00001

New product

48,00 € tax incl.

Reusable Pre-Filter For Private Water Supplies - 50 Micron Filtration Accuracy.

More details

A reusable pre-filter with a 50 Micron filtration accuracy, suitable for rain water harvesting, bore hole, stream and other private water supply filtration. This pre-filter can be used with rain water harvesting systems as a  main pipeline sediment water filter. Consists of filter housing, containing 50 micron stainless steel particle and sediment removal gauze that is flush-able and reusable. This sediment filter will remove sand, silt, grit and other particles from the water main going into your property. The unit is fitted with a flush tap that just requires you to open it, to flush debris to waste. Fitted with a pressure indicator so you can see if the pressure is increasing and the unit requires a flush. The filter bowl is fully removable as is the stainless steel gauze. If required this can be disassembled and cleaned should become contaminated and require additional cleaning.

This is a pre filter that can be used to remove particles larger than 50 Microns from rain water systems, bore hole water, well water and streams. As this is flush-able and reusable, it will dramatically reduce the loading on your disposable sediment and particle filters. It is as simple as opening the flush tap and letting the debris run to waste. A suitable pipe can be fitted to allow dirty waste water to be channeled away. There is fitted a simple pressure gauge, with a red button that will indicate pressure is increasing and this cross flow filter needs to be flushed. There will be times when you will need to remove the filter bowl, remove the internal stainless steel filter gauge and wash under running water.

Technical indicators:

Flow Rate: 1000L / H (concrete and installation environment: such as water pressure, pipe diameter, pipe fittings, which are pre-relationship)

Inlet- Outlet: 3/4 inches    3/4" BSP Female brass ports

Working Pressure: 0.6MPa

Filtration precision: 50-75 micron